2” Roper 3611 HBRV Pump (40-50 GPM) with 3 HP 1800 RPM TEFC motor connected and mounted on base plate with sheaves and double belt drive for large storage tanks or pumping and mixing operations.
2011EP-3 Phase Motor
2011EP-1 Phase Motor
The Model 1535A Feedlot Unit was designed for handling liquid feed products that are thick, viscous or abrasive. This unit has all the features of the Model 1500 above yet includes the larger Viking 1½” pump and 2 HP 115/230 volt motor. Units also include Neptune 3/4” Type S Meter with register. Both the pump and meter are sized for good pumping characteristics and long life on a variety of liquid feed products. Discharge hose is 1½” x 12’ with quarter turn valve. Tank includes 16” x 10” manhole and 2” Tee Vent.
The most popular ‘on the farm’ storage and pumping system available at a cost the feeder can afford. All units have a Roper 2835 1½” gear pump direct coupled to a 1 HP 1800 RPM TEFC motor with thermal overload protection. Units are wired for 115 or 230 volt single phase current, are complete with switch and cord. Includes automatic and manual by-pass valve for recirculation and pump protection. All have Fill-Rite 807AT 1” Teflon coated meter, 1” x 12’ discharge hose and quarter turn valves. Completely assembled on carbon steel skid tank for flexibility and ease of operation Tank includes 16” x 10” manhole.
LIMITED WARRANTY: All products manufactured by us are thoroughly tested before shipment and are warranted against defective materials and/or workmanship, under normal use for a period of one year. Our liability is limited to replacement or repair. We cannot accept any indirect or consequential damages arising out of the use or sale of these products. Owner or user must satisfy themself that specifications are adequate for the application.