5 Gallon container is designed to screw into a 2” fill opening in the top of a horizontal tank to catch an overfill or nozzle spillage. Interior connection is 2” female iron pipe thread to accept a 2” fill cap.
OVERFILL / SPILL CONTAINER
Dimensions are 12” x 12” x 10” tall Price $165.00
CLAY & BAILEY
OVERFILL VALVE
OVERFILL / SPILL PREVENTION DEVICES
The Mega Alarm system is developed to meet state and federal regulations requiring an audible overfill alarm system on above ground storage tanks. This system is self-contained and designed to work with a variety of existing level indicators. Tank Mount Switch fits in a 2” FPT tank opening.
FLOAT VENT VALVE
Float vent valves are inserted in an underground storage tank vent line to help prevent overfilling the tank. These valves have a galvanized steel pipe with stainless steel float. When the tank becomes about 95% full, the float ball rises and shuts off the venting. Greatly reduced flow into the tank warns the transport operator that the tank is being overfilled so that further filling can be stopped. Size: 2” x 6”.
OPW SPILL CONTAINER
OPW 1 Spill containers are designed to catch any spillage resulting from filling an underground tank. These containers have flexible polyethylene bellows to permit flexing from ground movement and includes a drain valve which can be used to release clean product into the tank.
Item # Dealer List
OPW1-2100 $383.82 $451.56
Item# Dealer List
MOR317 $33.65 $39.59
This valve is an over-fill prevention device for aboveground tanks where product is “pumped in” and a dry break coupling is used for hook up.
The fill ort on the valve is 2”, 3” or 4”. The valve is a full-flow straight through design. No diaphgrams, flappers or venturi tubes that restrict flow.
The valve threads onto a standard NPT threaded nipple. Adjustable fill tube permits “custom installation” on vaulted or single wall tanks.
Capacity on all sizes up to 200 gpm.
Sensor only for Tokheim Gauge
Tank mounted float level switch
Internal float switch only
OVERFILL PREVENTION VALVE
Clay & Bailey 2” valve is ideally suited for use on aboveground storage tanks for either a direct fill or a piped remote hook up. Pressure from 0 to 45 psi. for flow rates up to 65 gpm.
MORRISON DROP TUBE DIFFUSERS
The diffuser is attached to the end of a drop tube to reduce turbulence and minimize vapor loss. Available in various sizes and configurations.